ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Accessory Drive Belt - 1.8L Duratec-DOHC (Zetec) > < Accessory Drive

Transit.Tourneo Connect 2002.5 (06.2002-)

Accessory Drive - Accessory Drive Belt—1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel Transit/Tourneo Connect 2002.5 (06/2002-)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Remove the splash shield.

  1. Remove the accessory drive belt.
    1. Rotate the accessory drive belt tensioner clockwise.
    1. Remove the accessory drive belt.

Installation

Vehicles with air conditioning
  1. To install, reverse the removal procedure.

Vehicles without air conditioning
  1. To install, reverse the removal procedure.

Accessory Drive Belt - 1.8L Duratec-DOHC (Zetec) > < Accessory Drive