ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Glow Plug - Vehicles Built From: 08-2006 1.8L Duratorq-TDCi (Lynx) Diesel (75 PS-90 PS-110 PS) > < Glow Plug System
Glow Plug System - Glow Plug Wire—1.8L Duratorq-TDDi (Lynx) Diesel Transit/Tourneo Connect 2002.5 (06/2002-)
Removal and Installation

Special Tool(s)

Remover/Installer, Hose Clamp

303-397 (24-003)

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Remove the charge air cooler. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.

3. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Glow plug relay to glow plug wire terminal block cable electrical connector retaining nut
2
-
Glow plug relay to glow plug wire terminal block cable
3
-
Glow plug wire terminal block retaining bolt
4
-
Oil level indicator tube retaining bolt
6
-
Positive crankcase ventilation (PCV) hose retaining clamp
See Removal Detail
7
-
PCV hose
8
-
Glow plug wire electrical connector retaining nut
9
-
Glow plug wire

4. To install, reverse the removal procedure.

Removal Details

Item 5 : Oil level indicator tube

  1. Detach the oil level indicator tube and position it to one side.

Item 6 : Positive crankcase ventilation (PCV) hose retaining clamp

  1. Using the special tool, detach the PCV hose retaining clamp.

Glow Plug - Vehicles Built From: 08-2006 1.8L Duratorq-TDCi (Lynx) Diesel (75 PS-90 PS-110 PS) > < Glow Plug System