Ford Workshop Service and Repair Manuals

1. Remove the components in the order indicated in the following illustration(s) and table(s).

2. To install, reverse the removal procedure.

Removal Details

Item 1 : Air cleaner outlet pipe retaining clamp

NOTE:Detach and position the air cleaner outlet pipe to one side.

Item 2 : Intake air temperature (IAT) sensor electrical connector

Vehicles with 1.8L petrol engine, disconnect the mass air flow (MAF) sensor electrical connector.

Item 3 : Engine breather pipe

Vehicles with 1.8L petrol engine, disconnect the breather pipe.

Installation Details

Item 4 : Air cleaner

NOTE:Make sure the three locating pegs on the air cleaner housing are located into the rubber grommets on the support bracket.