ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Camshaft Position (CMP) Sensor - 1.8L Duratorq-TDCi (Lynx) Diesel > < Knock Sensor (KS)
Electronic Engine Controls - Fuel Temperature Sensor—Vehicles Built From: 08/2006 1.8L Duratorq-TDCi (Lynx) Diesel (75 PS/90 PS/110 PS) Transit/Tourneo Connect 2002.5 (06/2002-)
Removal and Installation

Removal

  1. Clean the fuel temperature sensor and surrounding areas.
    Refer to: Fuel Injection Component Cleaning - Vehicles With: Common Rail Fuel Injection (303-04B Fuel Charging and Controls - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel, General Procedures).

Installation

  1. NOTE:
    NOTE:Make sure that the sensor housing is clean and free of foreign material.
    To install, reverse the removal procedure.

Camshaft Position (CMP) Sensor - 1.8L Duratorq-TDCi (Lynx) Diesel > < Knock Sensor (KS)