ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Cylinder Head Temperature (CHT) Sensor - 1.8L Duratorq-TDCi (Lynx) Diesel-1.8L Duratorq-TDDi (Lynx) Diesel > < Cylinder Head Temperature (CHT) Sensor - 1.8L Duratec-DOHC (Zetec)

Transit.Tourneo Connect 2002.5 (06.2002-)

Electronic Engine Controls - Heated Oxygen Sensor (HO2S)—1.8L Duratec-DOHC (Zetec) Transit/Tourneo Connect 2002.5 (06/2002-)
Removal and Installation

Special Tool(s)

Socket, Fuel Injector (22 mm)

310-063 (23-050)
CAUTION:
CAUTION:When installing a new HO2S, it is possible that the new component will be supplied with a longer cable than the one removed. It is important that the cable is routed and secured in such a way that it cannot be damaged by heat or moving components and will not cause a noise, vibration or harshness (NVH) issue.

1. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Expansion tank coolant pipe retaining clips
2
-
Bypass tube retaining clips
3
-
Bypass tube
4
-
HO2S electrical connector
5
-
HO2S
See Removal Detail

2. To install, reverse the removal procedure.

Removal Details

Item 5 : HO2S

  1. Using the special tool remove the HO2S.

Cylinder Head Temperature (CHT) Sensor - 1.8L Duratorq-TDCi (Lynx) Diesel-1.8L Duratorq-TDDi (Lynx) Diesel > < Cylinder Head Temperature (CHT) Sensor - 1.8L Duratec-DOHC (Zetec)