Removal and Installation 2. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Front door latch remote control handle bezel retaining screw 2 - Front door latch remote control handle bezel 4 - Door pull handle retaining screws 8 - Door trim panel retaining screws 3. To install, reverse the removal procedure. Removal Details Item 6 : Power window switch | -
Detach the power window switch electrical connector. | Item 7 : Exterior mirror control switch | -
Detach the extirior mirror control switch electrical connector. | Item 9 : Door trim panel | -
To remove the door trim panel: - Pull the lower section of the door trim panel away from the door.
- Lift the door trim panel upwards and detach from the door glass interior weather seal.
| |