ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Door Lock Cylinder > < Front Door Lock Cylinder

Transit.Tourneo Connect 2002.5 (06.2002-)

Handles, Locks, Latches and Entry Systems - Liftgate Lock Cylinder Transit/Tourneo Connect 2002.5 (06/2002-)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the liftgate latch trim panel.

  1. Remove the liftgate lock cylinder retaining clip.

  1. Release the liftgate lock cylinder locking pin.
    1. Insert the key into the liftgate lock cylinder and rotate 90° clockwise.
    1. Using a suitable tool, press in the liftgate lock cylinder locking pin and release the key.

  1. Remove the liftgate lock cylinder.
    1. Rotate the liftgate lock cylinder anticlockwise.
    1. Remove the liftgate lock cylinder.

Installation

  1. To install, reverse the removal procedure.

Rear Door Lock Cylinder > < Front Door Lock Cylinder