ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Tank > < Fuel Tank Filler Valve
Fuel Pressure Regulator Filter ElementTransit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

WARNING:

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

WARNING:

The fuel tank manual valves must be closed and fuel line pressure released before attempting any repairs. Failure to follow this instruction may result in personal injury.

1. Depressurize the CNG system. For additional information, refer to Fuel System Pressure Release in this section.
2. Remove the fuel pressure regulator. For additional information, refer to Fuel Pressure Regulator in this section.

3. Remove the fuel pressure regulator filter element cover plug.

4. Remove and discard the filter element and O‐ring.
Install

WARNING:

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

WARNING:

The fuel tank manual valves must be closed and fuel line pressure released before attempting any repairs. Failure to follow this instruction may result in personal injury.

NOTE:

Install a new filter element and O‐ring.

5. To install, reverse the removal procedure.
6. Check the system for leaks. For additional information, refer to High‐Pressure Leak Test and Low‐Pressure Leak Test in this section.

Fuel Tank > < Fuel Tank Filler Valve