ford Workshop Repair Guides

Ford Transit Workshop Service and Auto Repair Manuals

ABOUT US
Fuel Injectors > < Fuel Tank

Removing the Vehicle Fuel Tank Pressure Sensor

Fuel Tank Pressure SensorTransit 1995 (08/1994-07/2000)
Print Print
Removal and Installation
Remove

WARNING:

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

WARNING:

The fuel tank manual valves must be closed and fuel line pressure released before attempting any repairs. Failure to follow this instruction may result in personal injury.

1. Depressurize the CNG system. For additional information, refer to Fuel System Pressure Release in this section.
2. Raise and support the vehicle. For additional information, refer to Section 01‐03.

3. Disconnect the fuel tank pressure sensor electrical connector.

4. Support the pressure sensor fitting and remove the fuel tank pressure sensor.
Install

WARNING:

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

WARNING:

The fuel tank manual valves must be closed and fuel line pressure released before attempting any repairs. Failure to follow this instruction may result in personal injury.

5. To install, reverse the removal procedure.
6. Check the system for leaks. For additional information, refer to High‐Pressure Leak Test and Low‐Pressure Leak Test in this section.

Fuel Injectors > < Fuel Tank