Disassembly and Assembly Special Tool(s) | Remover, Bearing/Gear 205-310 (15-091) | | Remover, Bearing/Gear 205-311 (15-092) | General Equipment Disassembly | -
CAUTION:Assemble the special tool with a 12 mm gap between the two halves. Failure to follow this instruction may result in damage to the drive pinion. Using the special tools, remove the drive pinion rear bearing cone and shim from the drive pinion. | | -
Using a suitable micrometer, measure the shim and record the thickness. | Assembly | -
Using a length of suitable tube, install the drive pinion rear bearing cone and shim to the drive pinion. | | |