| Removal and Installation Special Tool(s) | | Installer, Rear Wheel Hub Oil Seal 205-215 (15-078) | | | Installer, Rear Wheel Hub Bearing Cone/Oil Seal 205-216 (15-079) | | | Installer, Rear Wheel Hub Bearing Cone/Oil Seal 205-217 (15-080) | General Equipment Materials Name Specification Grease SAM-1C-9111-A Removal | | -
Remove the wheel hub. For additional information, refer to Wheel Hub in this section. | | | -
Using a suitable drift, remove the outer wheel hub bearing cup. | | | -
NOTE:Place the wheel hub on wooden blocks. Using a suitable drift, remove the two axle shaft oil seals and the inner wheel hub bearing cone. | | | -
Using a suitable drift, remove the inner wheel hub bearing cup. | Installation | | -
Lubricate the wheel hub bearings and the axle shaft oil seals with grease prior to installation. | | | -
Using the special tool, install the outer wheel hub bearing cup. | | | -
Using the special tool, install the axle shaft oil seal. | | | -
Install the inner wheel hub bearing cone. | | | -
Using the special tool, install the axle shaft oil seal. | | | -
Install the wheel hub. For additional information, refer to Wheel Hub in this section. | | |
