Removal and Installation Special Tool(s) | Adapter for 205-066 205-066-01 (15-033-01) | | Installer, Rear Wheel Hub Seal 205-215 (15-078) | | Remover, Halfshaft Seal 308-208 (16-074) | General Equipment Soft metal drift Wooden blocks Materials Name Specification Grease WSD-M1C228-A Removal | -
Remove the brake drum. For additional information, refer to Section 206-02 Drum Brake. | | -
Remove the outer wheel bearing cone. | | -
Remove the wheel bearing spacer. | | -
Using the special tools, remove the wheel hub seal. | | -
Remove the inner wheel bearing cone. | | -
NOTE:Support the brake drum on suitable wooden blocks. | | -
NOTE:Support the brake drum on suitable wooden blocks. | Installation | -
CAUTION:Make sure the wheel bearing cup is fully seated. NOTE:Support the brake drum on suitable wooden blocks. Using the special tool and a suitable press, install the inner wheel bearing cup. | | -
CAUTION:Make sure the wheel bearing cup is fully seated. Using the special tool and a suitable press, install the outer wheel bearing cup. | | -
Coat the inner wheel bearing cone with grease. | | -
Install the inner wheel bearing cone. | | -
CAUTION:Make sure the wheel hub seal is fully seated. Using the special tool, install the wheel hub seal. | | -
Install the wheel bearing spacer. | | -
Coat the outer wheel bearing cone with grease. | | -
Install the outer wheel bearing cone. | | -
Install the brake drum. For additional information, refer to Section 206-02 Drum Brake. | | |