ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Thermostat Housing - 2.0L Duratorq-Di (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.0L Duratorq-TDDi (Puma) Diesel > < Thermostat - 2.3L DOHC-16V

Transit 2000.5 (01.2000-05.2006)

Engine Cooling - Thermostat Housing—2.4L Duratorq-Di (Puma) Diesel/2.4L Duratorq-TDCi (Puma) Diesel Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Special Tool(s)

Remover/Installer, Cooling Hose Clamp

303-397 (24-003)

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

  1. Slide open the bolt cover.

  1. Remove the accessory drive belt shield retaining bolts.

  1. Detach the fuel charging wiring harness and remove the accessory drive belt shield.

  1. Using the special tool, disconnect the coolant hoses from the thermostat housing.

  1. Remove the thermostat housing retaining bolt.

  1. Using the special tool, disconnect the coolant hoses and remove the thermostat housing.

Installation
  1. To install, reverse the removal procedure.

Thermostat Housing - 2.0L Duratorq-Di (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.0L Duratorq-TDDi (Puma) Diesel > < Thermostat - 2.3L DOHC-16V