Removal and Installation Removal | -
Using suitable pieces of wire, support the radiator. | | -
Disconnect the charge air cooler intake pipe from the charge air cooler. | | -
Disconnect the charge air cooler outlet pipe from the charge air cooler. | | -
Disconnect the temperature and manifold absolute pressure (T-MAP) sensor electrical connector. | | -
Disconnect the horn electrical connector. | | -
Remove the horn and bracket assembly. | | -
Remove the radiator support bracket lower bolt. | | -
Remove the radiator support bracket right-hand retaining bolts. | | -
Remove the radiator support bracket. | | -
Remove the charge air cooler. | Installation | -
To install, reverse the removal procedure. | | |