ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Pilot Bearing > < Clutch Disc and Pressure Plate - 2.4L Duratorq-Di (Puma) Diesel

Transit 2000.5 (01.2000-05.2006)

Clutch - Vehicles With: MT-75 - Clutch Disc and Pressure Plate—2.3L DOHC-16V Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Special Tool(s)

Aligner, Clutch Plate

308-204 (16-067)

Removal

  1. Remove the transmission. For additional information, refer to Section  308-03A Manual Transmission/Transaxle / 308-03B Manual Transmission/Transaxle / 308-03C Manual Transmission/Transaxle.

  1. CAUTION:
    CAUTION:Loosen the clutch pressure plate retaining bolts by two turns at a time in the sequence shown.
    Remove the clutch disc and pressure plate.

Installation

  1. Install a new pilot bearing.
    For additional information, refer to Pilot Bearing in this section.

  1. Using the special tool, centralize the clutch disc on the pressure plate.

  1. CAUTION:
    CAUTION:Tighten the clutch pressure plate retaining bolts finger tight and then by two turns at a time in the sequence shown to the specified torque.
    Using the special tool, install the clutch disc and pressure plate.
  1. Remove the special tool.
  1. Install the transmission. For additional information, refer to Section  308-03A Manual Transmission/Transaxle / 308-03B Manual Transmission/Transaxle / 308-03C Manual Transmission/Transaxle.

Pilot Bearing > < Clutch Disc and Pressure Plate - 2.4L Duratorq-Di (Puma) Diesel