Transit Connect L4-2.0L (2010)
1. If equipped with power door locks, remove the Central Junction Box (CJB) fuse 163 (20A) to prevent the Generic Electronic Module (GEM) from
actuating the door locks.
2. Remove the rear door trim panel.
3. Position the water shield aside.
4. Remove the rear door lock cylinder retaining clip.
5. Release the rear door lock cylinder locking pin.
1. Insert the key into the rear door lock cylinder and rotate to the unlock position.
2. Using a suitable tool (such as a pick), press in the rear door lock cylinder locking pin and release the key.
6. Remove the rear door lock cylinder.
1. Rotate the rear door lock cylinder to the lock position.
2. Pull out on the rear door lock cylinder.
