Transit Connect L4-2.0L (2010)
Brake Shoe: Customer Interest
Brakes - Rear Brake Creak On Stationary Brake Apply
TSB 10-9-6
05/24/10
CREAK NOISE FROM REAR - WITH BRAKES APPLIED
FORD:
2010 Transit Connect
ISSUE
Some 2010 Transit Connects vehicles may exhibit a creak noise from the rear brakes, with brakes applied and vehicle not moving.
ACTION
Follow the Service Procedure to correct the condition.
SERVICE PROCEDURE
1. Remove the rear brake drums. Refer to the Workshop Manual (WSM), Section 206-02.
2. Apply Motorcraft® High Temperature Nickel Anti-Seize Lubricant or equivalent between the upper return spring and brake shoe, at the two points
where they may touch. (Figure 1)
3. Reinstall the rear brake drums. Refer to the WSM, Section 206-02.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100906A
2010 Transit Connect:
0.4 Hr.
Apply Anti Seize Following
Service Procedure (Do Not
Use With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
2001
42
