Windstar V6-232 3.8L (1995)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Back/Liftgate Door Panel
Liftgate Trim Panel
Removal
1. Disconnect rear window defroster wires.
2. Remove the liftgate window garnish moulding as described.
3. Remove screws attaching liftgate handle to liftgate and liftgate inside trim panel.
4. Using Rotunda Windshield and Moulding Trim Removal Kit 107-R0401 or equivalent, pry pushpins retaining liftgate trim from the liftgate.
5. Remove liftgate trim.
Installation
1. Follow removal procedure in reverse order.
