Windstar V6-232 3.8L (1995)
Installation
1. Replace any bent or damaged fasteners.
2. Follow removal procedure in reverse order.
Body Side/Sliding
Body Side/Sliding Door Panel
Removal
1. Remove door handle retaining clip by sliding a shop towel between handle and door trim. With tension on the cloth, pull one end of the cloth so it
slides between the handle and the door trim. If handle does not come out, reverse direction.
2. Unfasten 13 christmas tree fasteners using double-acting spring-loaded trim removal tool and pull body side trim panel from body side door.
3. Remove forward and rearward mating sections from under window trim.
Installation
1. Replace all christmas tree fasteners.
2. Follow removal procedure in reverse order.
3. For installation of handle, install clip to handle, then push handle onto shaft to snap in place.
Back/Liftgate
