Acadia FWD V6-3.6L (2007)
18. Install the wheel drive shaft nut.
Important: The following step is to ensure that the wheel drive shaft assembly does not rotate while the nut is being installed.
19. Insert a brass drift or punch in the brake rotor so that the brass drift or punch rest against the brake caliper mounting bracket.
20. Using a torque wrench and socket, tighten the new wheel drive shaft nut.
Tighten the nut to 260 N.m (192 lb ft).
21. Install the muffler.
22. Install the rear tire and wheel assemblies.
23. Lower the vehicle.
