Ball Joint: Specifications
- Make
- GMC
- Model
- Acadia FWD
- Engine
- V6-3.6L
- Year
- 2007
- Section
- Suspension › Ball Joint › Specifications
Steering and SuspensionSpecifications
Ball Joint: Specifications
Ball Joint Inspection (Front Suspension)
The reading should be within ......................................... 0.7 mm (0.028 in) specification. If the ball joint is out of specification, replace the ball joint.
Ball Joint Inspection (Rear Suspension)
If the reading is .................................................................... 0.5 mm (0.020 in) or more, replace the ball joint. Refer to Lower Ball Joint Replacement.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2007 GMC Acadia 3.6L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: GMC power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.