Acadia FWD V6-3.6L (2007)
12. Install the reinforcements (1).
13. Install the rear frame to body bolts (4).
Tighten the bolts to 110 N.m (81 lb ft) plus 90 degrees.
14. Install the reinforcement bolts (2).
Tighten the bolt to 60 N.m (44 lb ft).
15. Install the reinforcement studs (3).
Tighten the stud to 60 N.m (44 lb ft).
16. Remove the alignment pins from the frame.
17. Install the engine and transaxle mount nuts.
Tighten the nuts to 75 N.m (55 lb ft).