C 1500 Truck 2WD V6-4.3L VIN W (2001)
5. Use the J 23523-F in order to press the crankshaft balancer onto the crankshaft.
5.1.
Install the J 23523-F plate and bolts onto the front of the crankshaft balancer.
^
Tighten the J 23523-F plate bolts to 25 Nm (18 ft. lbs.).
5.2.
Install the J23523-F screw into the end for the crankshaft.
5.3.
Install the J 23523-F bearing, the washer, and the nut onto the screw.
5.4.
Rotate the J 23523-F nut clockwise until the crankshaft balancer hub is completely seated against the crankshaft position sensor reluctor
ring.
6. Remove the J 23523-F
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the crankshaft pulley and bolts.
^
Tighten the crankshaft pulley bolts to 58 Nm (43 ft. lbs.).
8. Ensure that the crown of the crankshaft balancer washer (2) is faced away from the engine.
