C 1500 Truck 2WD V8-6.0L VIN U (2002)
9. Install the retaining ring.
10. Install the axle shaft.
11. Inspect the lubricant level and add, if necessary.
12. Lower the vehicle.
Revised Wheel Bearing Adj. (10.5" & 11.5" Ring Gear)
REVISED WHEEL BEARING ADJ. (10.5" & 11.5" RING GEAR)
Bulletin No.: 02-04-20-002
Date: May, 2002
IMPORTANT:
Ensure the brakes are fully released and do not drag.
^
Pull or push the tire at the top back and forth in order to test the wheel bearing play.
^
Use a pry bar under the tire as an alternative.
^
If the wheel bearing adjustment is correct, the movement will be barely noticeable.
^
If the movement is excessive, adjust the bearings.
Adjustment Procedure Tools Required J 2222-C Wheel Bearing Nut Wrench
1. Raise the vehicle.
2. Remove the axle shaft.
3. Remove the hub adjuster nut retaining ring.
4. Remove the adjuster nut lock key.
