C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
4.2. Using the two small pry bars, take out the cup plug.
4.3. Use a slide hammer to remove the oil cooler bypass valve from the engine block.
5. Clean the recess of the engine block.
INSTALLATION PROCEDURE
1. Install the oil cooler bypass valve by using a socket to drive the bypass valve into the bore until seated on the shoulder in the bore.
IMPORTANT: This plug has an orifice hole that prevents an air lock from occurring and blocking the oil flow.
2. Install the cup plug for the oil cooler bypass valve.
3. Install the oil filter bypass valve into the engine block.
4. Use a socket to drive the valve into the bore until the valve seats against the shoulder inside the bore.
5. Install the oil filter adapter into the engine block (2WD only).
NOTICE: Refer to Fastener Notice in Caution and Notices.
