C 2500 Truck 2WD V8-6.0L VIN U (2002)
-
Tighten the intake manifold sight shield retainer bolts to 5 Nm (44 inch lbs.).
Notice: Use care when installing the engine sight shield to avoid contacting the manifold absolute pressure (MAP) sensor wire harness connector.
Loss of engine performance or engine damage may result.
7. Install the intake manifold sight shield to the retainer.
8. Tighten the intake manifold sight shield bolt.
-
Tighten the intake manifold sight shield bolt to 9 Nm (80 inch lbs.).