C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
29. Connect the positive battery cable.
30. Connect the battery negative cable.
31. Install the air cleaner outlet duct.
32. Tighten the clamps at the throttle body and air cleaner.
33. Remove fender covers from both fenders.
34. Remove the hood hinge bolts from the service position (2).
35. Lower the hood to the normal position.
36. Install the hood hinge bolts.
-
Tighten the hood hinge bolts to 25 Nm (18 ft. lbs.).
37. Before starting a new engine or one that has been repaired, complete the following procedure.
37.1.
Fill the engine with the proper quantity and grade of oil. Add engine oil supplement GM U.S. P/N 1052367, Canada P/N 992869, or
equivalent to the engine oil.
37.3.
Remove the fuel pump fuse and disconnect the coil harness connectors, then crank the engine until oil pressure is present.
37.4.
Crank the engine several times. Listen for any unusual noises or evidence that any of the parts are binding.
