C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
21. Install the ground cable bolt at the engine block.
-
Tighten the engine wiring harness bolt to 16 Nm (12 ft. lbs.).
22. Install the EGR valve adapter.
23. Install the vacuum lines to the engine.
24. Connect the TAC module electrical connector (1).
25. Install the radiator.
26. Install the A/C compressor.
27. Disconnect the fuel feed and return pipes (1, 2) from the fuel rail.
28. Install the ignition coils.