C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Engine Mount: Service and Repair
Engine Mount Inspection Front Engine Mount
Front Engine Mount
Notice: Refer to Engine Mounting Notice in Service Precautions.
Notice: Refer to Engine Lifting Notice in Service Precautions.
1. Raise the engine in order to remove the weight from the mount and to place a slight tension on the rubber cushion. Observe both mount while
raising the engine.
2. Replace the mount if any of the following conditions exist:
^
Hard rubber surface covered with heat check cracks
^
The rubber cushion separated from the metal plate of the mount
^
The rubber cushion is split through the center
3. If there is movement between a metal plate of the mount and its attaching points, lower the engine and tighten the bolts or nuts attaching the mount
to the engine, the frame or the bracket.
