Canyon 2WD L4-2.9L (2008)
14. Install the 3 bolts (1) securing the cupholder bracket to the seat frame, if equipped.
Tighten the front seat cupholder bracket bolts to 9.1 N.m (80 lb in).
15. Install the front seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion Outer Trim Panel
Replacement) .
16. Install the cupholder to the seat by pushing it straight onto the bracket.
17. Install the seat in the vehicle. Refer to Front Seat Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket) or Split
Bench Seat Replacement (See: Service and Repair/Split Bench Seat Replacement) .
Rear Seat Cushion Cover and Pad Replacement (Crew Cab)
Rear Seat Cushion Cover and Pad Replacement (Crew Cab)
Removal Procedure
