Canyon 2WD L4-2.9L (2008)
9. Install the 2 bolts (1) securing the seat recliner to the seat adjuster.
Tighten the front seat recliner bolts to 24 N.m (18 lb ft).
10. Install the seat switch bezel, if equipped. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Service and
Repair/Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement) .
11. Install the lumbar knob by pushing the knob straight onto the shaft, if equipped.
12. Install the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver Seat and
Passenger Seat Recliner Handle Replacement) .
13. Install the front, rear, and side J-strips (1, 2) to the underside of the seat.