Canyon 2WD L4-2.9L (2008)
3. Install the seat cushion foam pad and cover to the frame.
4. Install the seat belt buckle assembly (1) through the seat cushion pad.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).
Tighten the front seat belt buckle bolt to 55 N.m (41 lb ft).
6. Connect the seat belt buckle electrical connector (1).
7. Install any clips or straps securing the electrical harness to the bottom of the seat cushion frame.
8. Position the seat back assembly on the seat cushion assembly.