Canyon 2WD L4-2.9L (2008)
1. Position the water outlet housing to the cylinder head.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the water outlet housing bolts.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the power steering pump bracket. Refer to Power Steering Pump Bracket Replacement (See: Steering and Suspension/Steering/Power
Steering/Power Steering Pump/Service and Repair).
4. Position the J 38185 to the clamp (8) in order to connect the radiator outlet hose (7) to the water outlet housing.
5. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair)Cooling System Draining and Filling
(Vac N Fill) (See: Service and Repair).
6. Inspect all sealing surfaces for leaks after starting the engine.
