Canyon 2WD L4-2.9L (2008)
4. Install the fuel fill hose to the fuel tank.
5. Connect the fuel tank EVAP line (1) quick connect fitting to the fill tube vent line. Refer to Plastic Collar Quick Connect Fitting Service (See:
Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
6. Tighten the fuel fill hose clamp (2) at the fuel tank.
Tighten the clamp to 2.5 N.m (22 lb in).
7. Install the ground strap to the frame. Ensure that the anti rotation tab is inserted into the hole in the frame.
8. Install the fuel fill hose ground strap bolt.
Tighten the bolt to 9 N.m (80 lb in).
9. Install the left pickup box wheelhouse liner. Refer to Pickup Box Wheelhouse Liner Replacement (See: Body and Frame/Fender/Rear
Fender/Rear Fender Liner/Service and Repair) .
10. Lower the vehicle.
11. Refill the fuel tank.
12. Install the fuel fill cap.
