Canyon 2WD L5-3.5L VIN 6 (2004)
2. Position the water pump to the engine.
3. Install the water pump bolts.
^
Tighten the water pump bolts to 10 Nm (89 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the water pump pulley.
5. Install the water pump pulley bolts.
6. Using the J 46406, secure the water pump pulley while tightening the water pump pulley bolts.
^
Tighten the water pump pulley bolts to 25 Nm (18 ft. lbs.).
7. Remove the J 41240.
8. Install the drive belt.
9. Install the fan.
10. Fill the cooling system with the specified coolant and concentration.
11. Inspect for leaks.