Canyon 2WD L5-3.5L VIN 6 (2004)
7.
Connect the power steering hose assembly to the steering gear. Refer to Power Steering Gear Inlet and Outlet Hose Replacement.
8.
Install the engine shield. Refer to Engine Shield Replacement.
9.
Install the outer tie rod end to the steering knuckle. Refer to Rack and Pinion Outer Tie Rod End Replacement.
10.
Install both of the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
11.
Lower the vehicle.
12.
Bleed the power steering system. Refer to Bleeding the Power Steering System.
13.
Check the wheel alignment. Refer to Measuring Wheel Alignment.
Disclaimer