Canyon 2WD L5-3.7L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine
Evaporative Emission Hoses/Pipes Replacement - Engine
Removal Procedure
Caution: Refer to Fuel and Evaporative Emission Pipe Caution.
Caution: Refer to Gasoline/Gasoline Vapors Caution.
Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice.
1. Refer to Plastic Collar Quick Connect Fitting Service in order to disconnect the evaporative emission (EVAP) hose (1) from the following:
* The throttle body assembly (2)
* The EVAP canister purge solenoid valve (3)
2. Remove the EVAP hose (1) from the engine.
Installation Procedure
1. Position the EVAP hose (1) to the engine.
2. Refer to Plastic Collar Quick Connect Fitting Service in order to connect the EVAP hose to the following:
* The throttle body assembly (2)
* The EVAP canister purge solenoid valve (3)