Canyon 4WD V8-5.3L (2009)
Fluid Filter - A/T: Service and Repair
Automatic Transmission Fluid and Filter Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
Note: Do not pull on the boot portion of the cable.
2. Complete the following in order to disconnect the range selector cable (3) from the transmission range selector lever ball stud:
1. Insert a flat-bladed tool between the range selector cable end (5) and the range selector lever (1).
2. Pry the range selector cable end (5) away from the range selector lever (1).
3. Remove the bolts securing the transmission range selector cable bracket to the transmission.
