Canyon 4WD V8-5.3L (2009)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder Replacement
Tools Required
J 42371 Hydraulic Clutch Line Separator
Removal Procedure
Important: A new retainer (3) is required after removal.
1. Complete the following in order to disengage the retainer (3) from the clutch pedal pin.
1. Insert a flat bladed tool (4) between the clutch master cylinder push rod (1) and the clutch pedal (2).
2. Pry the clutch master cylinder push rod (1) away from the clutch pedal assembly (2).
Discard the retainer (3).
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
