Canyon 4WD V8-5.3L (2009)
9. Insert a new retainer (3) into the clutch master cylinder push rod (1).
10. Push the clutch master cylinder push rod (1) onto the clutch pedal pin to secure.
11. Adjust the clutch release switch. Refer to Clutch Pedal Cruise Control Release Switch Adjustment (See: Cruise Control/Clutch
Switch/Adjustments).
12. Adjust the clutch pedal position switch. Refer to Clutch Pedal Position Switch Replacement (See: Clutch Pedal Position Sensor / Switch/Service
and Repair).
13. Bleed the clutch hydraulic system, only if necessary. Refer to Hydraulic Clutch Bleeding (See: Service and Repair).
