Canyon 4WD V8-5.3L (2009)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
1. Disconnect the electrical connectors (2, 4) from the following components:
*
The clutch pedal position switch (1)
*
The cruise control release switch (3)
Note: A new retainer (3) is required after removal.
2. Complete the following in order to disengage the retainer (3) from the clutch pedal pin.
1. Insert a flat-bladed tool (4) between the clutch master cylinder push rod (1) and the clutch pedal (2).
