Canyon 4WD V8-5.3L (2009)
3. Insert a new retainer (3) into the clutch master cylinder push rod (1).
4. Push the clutch master cylinder push rod (1) onto the clutch pedal pin to secure.
5. Connect the electrical connectors (2, 4) to the following components:
*
The clutch pedal position switch (1)
*
The cruise control release switch (3)
6. Adjust the clutch release switch. Refer to Clutch Pedal Cruise Control Release Switch Adjustment (See: Cruise Control/Clutch
Switch/Adjustments).
7. Adjust the clutch pedal position switch. Refer to Clutch Pedal Position Switch Replacement (See: Clutch Pedal Position Sensor / Switch/Service
and Repair).
8. Check for proper clutch pedal movement and operation.