Canyon 4WD V8-5.3L (2009)
Seals and Gaskets: Service and Repair
Input Shaft Seal Replacement
Input Shaft Seal Replacement
Special Tools
*
J 3289-20 Holding Fixture
*
J 23907 Slide Hammer with Bearing Adapter
*
J 45278 Seal Remover
*
J 45759 Assembly Fixture
*
J 45934 Input Seal Installer
Removal Procedure
1. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement (See: Service and Repair/Removal and Replacement/Transfer
Case Assembly Replacement).
2. Install the J 45759 to the transfer case, using 4 suitable bolts.