Envoy 2WD L6-4.2L (2008)
1. Position the battery positive cable in the engine compartment.
2. Install the positive battery cable to the generator.
Notice: Refer to Fastener Notice.
3. Install the positive battery cable terminal nut (1).
Tighten the nut to 9 N.m (80 lb in).
4. Position the positive battery cable boot (3).
5. Install the positive battery cable terminal (2) to the starter.
6. Install the positive battery cable nut (1) to the starter.
Tighten the nut to 9 N.m (80 lb in).
7. Install the battery positive cable harness to the fir-tree retainer on the PCM bracket.