Envoy 2WD V8-5.3L VIN M (2005)
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the cargo tie down loops and the cargo tie down blanks.
Tighten the cargo tie down loop bolt to 35 N.m (26 lb ft).
6. Install the rear floor front trim plate.
7. Install the body lock pillar upper tie bar trim cover.
8. Install the cargo mat.
Trim Panel Replacement - Body Side (XUV)
TRIM PANEL REPLACEMENT - BODY SIDE
REMOVAL PROCEDURE
1. Remove the cargo mat.
2. Remove the body lock pillar upper tie bar trim cover.
3. Remove the rear floor front trim plate.
4. Remove the cargo tie down loops and the cargo tie down blanks.
5. Remove the cargo lamp.
6. Remove the endgate window emergency switch, if equipped.
7. Remove the auxiliary power outlet from the trim panel, if equipped.
8. Remove the body side trim panel from the vehicle.
INSTALLATION PROCEDURE