Envoy 4WD V8-5.3L VIN M (2005)
1. Install the park brake lever assembly to the vehicle.
2. Install the right front park brake lever retaining nut.
Tighten the park brake lever mounting nut to 25 Nm (18 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Connect the electrical connector to the park brake warning lamp switch.
4. Raise the vehicle.
5. Connect the park brake cables to the equalizer.
6. Lower the vehicle.
7. Install the floor console.
8. Enable the park brake automatic adjuster.