K 1500 Truck 4WD V8-393 6.5L DSL VIN P (1995)
Seals and Gaskets: Service and Repair
Pinion Seal
Front Axle
-
Tools Required:
-
J 8614-01 Companion Flange Holder and Remover
-
J 36366 Seal Installer
Remove or Disconnect
-
Raise the vehicle on a hoist.
1. Propeller shaft from the axle.
-
Tie the propeller shaft to a frame rail or crossmember.
Measure
-
The torque required to rotate the pinion. Record the torque value for reassembly.
Important: Scribe a line on the pinion stem, pinion nut and the companion flange and record the number of exposed threads on the pinion stem.
