K 1500 Truck 4WD V8-5.3L VIN T (2000)
Fuel Line Coupler: Service and Repair
Metal Collar
TOOLS REQUIRED
^
J 34730-1A Fuel Pressure Gauge
^
J 37088-A Tool Set, Fuel Line Quick-Connect Separator
REMOVAL PROCEDURE
1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Relief Procedure.
2. Slide the dust cover from the quick-connect fitting.
CAUTION: Refer to Safety Glasses and Compressed Air Caution in Cautions and Notices.
3. Blow dirt out of the fitting using compressed air.
4. Choose the correct tool from the J 37088-A tool set for the size of the fitting. Insert the tool into the female connector, then push inward in order to
release the locking tabs.
