K 2500 Truck 4WD V8-5.3L VIN T (1999)
Control Arm: Service and Repair
Front Lower
REMOVAL PROCEDURE
-
Tools Required
-
J 43631 Ball Joint Separator
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the stabilizer shaft links from the lower control arm.
4. Remove the shock absorber nut and the bolt.
5. Remove the torsion bars.
6. Remove the halfshaft.
7. Remove the lower ball joint stud nut.
8. Disconnect the lower ball joint stud from the steering knuckle using J 43631.
9. Remove the lower control arm nuts and the washers (15 Series).
10. Remove the lower control arm bolts.
11. Remove the lower control arm nuts and the washers (25 Series).
12. Remove the lower control arm bolts
13. Remove the lower control arm.
INSTALLATION PROCEDURE
