K 2500 Yukon 4WD V8-6.0L VIN U (2000)
6. Support the vehicle with safety stands.
7. Tighten the nut to the intermediate cable at the equalizer.
^
Tighten the nut to 3.5 N.m (31 lb in).
8. Remove the safety stands.
9. Lower the vehicle.
10. Connect the park brake release cable to the park brake lever.
11. Connect the park brake warning lamp connector.
12. Install the left side hinge pillar panel.
13. Install the left side kick panel.
14. Connect the negative battery cable.
^
Tighten the nuts to 17 N.m (13 lb ft).